Installation instructions, 6b. firegrate removal (riva avanti), 6a. firegrate removal (riva) – Stovax PM235 RV66AVC User Manual
Page 24
24
6a.4 Replace the grate in the reverse order from removal.
6a.5 The grate must sit flat on the side supports, with no debris
trapped under it. Check that the centre grate sits flat and
rotates freely with no debris trapped under it.
6B. FIREGRATE REMOVAL (RIVA AVANTI)
(Tools required – None)
6b.1 To remove the firegrate first remove the centre grate:
• Disconnect the operating linkage from the grate
• Move the Primary air control to the fully open position
• Spring the operating link forward to disconnect the
balljoint
The centre grate can then be lifted out from inside of the
firebox.
11
6b.2 The main grate can then be lifted out of the firebox.
6b.3 Replace the grate system in the reverse order from removal.
6b.4 Ensure that the seal tape on the underside of the grate is in
good condition and correctly fitted. If not replace with new.
(Stovax part number 4998)
PR7061
Seal Tape
12
6b.5 The grate must sit flat on the side supports, with no debris
trapped under it. Check that the centre grate sits flat and
rotates freely with no debris trapped under it.
INSTALLATION INSTRUCTIONS
6A. FIREGRATE REMOVAL (RIVA)
6a.1 To remove grate:
• First remove the centre grate by tipping the grate control
boss downwards and lifting the centre grate vertically
PR7250
8
6a.2 The main grate can then be lifted by the front first and then
rotating the main grate to clear the firebox.
PR7241
9
6a.3 Ensure that the seal tape on the underside of the grate is
in good condition and correctly fitted. If not, replace with
new. (Stovax part number 4998)
Seal Tape
PR7061
10