GE 164D2966P087 - Manual (Page 6)

FEATURES OF YOUR OVEN CONTROL
UPPER OVEN
HI AUTO SELF
BAKE CLEAN
1. BAKE. Press this pad to select the bake function,
2. BROIL. Press this pad to select the broil function.
3. AUTO SELF CLEAN. Press this pad to select
self-cleaning function. See the Operating the Self-
Cleaning Oven section.
4. DISPLAY. Shows the operations you have
selected, the time of the day, and the cooking or
cleaning status.
5. INCREASE. Short taps to this pad increase the
time or temperature by small amounts. Press and
hold the pad to increase the time or temperature by
larger amounts.
6. Press this pad to cancel oven
operations except Clock and Timer.
7. DECREASE. Short taps to this pad decrease the
time or temperature by small amounts. Press and
hold the pad to decrease the time or temperature by
larger amounts.
8. OVEN LIGHTS. Press this pad to turn the oven
lights on or off.
9. CLOCK. To set the clock, first press the CLOCK
pad. Then press the INCREASE or DECREASE
pad to set the time of day. Press the CLOCK pad
to start.
LO m@
AUTO SELF
CLEAR
CLEAN —
OFF
10. ON/OFF. Press this pad to select the
timer function. The timer does not control oven
operations. The timer can time up to hours
55 minutes.
To set the timer, first press the TIMER ON/OFF
pad. Then press the INCREASE or DECREASE
pad to
the time.
To cancel the timer, press and hold the TIMER
ON/OFF
the word “TIMER’. disappears –
the display.
11. STOP TIME. Use this pad along with the
COOK TIME or AUTO SELF CLEAN pad to
set the oven to start and stop automatically at a
time you select.
12. COOK TIME. Use this pad Timed Bake,
Timed Convection Bake Timed Convection
Roast operations.
13. PROBE. Press this when using the probe
cook food (upper oven only).
14. CONVECTION ROAST. Press this pad to select
roasting with convection.
15. CONVECTION BAKE. Press this pad to
baking convection.
If “F-and number” flash in the display and
the oven control signals, this indicates function
error code. Press the
pad. At low
oven to cool for one hour. Put the oven back into
operation. If function error code repeats,
disconnect power to the oven and call for service.
6