Gateway LWGC-220 - Manual (Page 35)

31
Step 3: Configuring the TCP/IP protocol
www.gateway.com
To set up a DHCP IP address for Windows 2000:
1 Click Start , Settings , then click Network and Dial-up
Connections . The Network and Dial-up Connections
window opens. This window has an icon for each
networking connection available on your computer.
For example, if you have both wired and wireless
Ethernet hardware installed on your computer, there
will be at least two icons, one for your wired Ethernet
hardware and one for your wireless Ethernet
hardware.
2 Right-click the Local Area Connection icon for the
wireless Ethernet hardware, then click Properties . The
Local Area Connection Properties dialog box opens.
3 Click to select the Internet Protocol (TCP/IP) check box in
the Components checked are used by this connection list. If
you do not see TCP/IP, drag the scroll bar to see more
choices.
8509391.book Page 31 Tuesday, August 12, 2003 12:52 PM