Gateway LWGC-220 - Manual (Page 31)

27
Step 2: Configuring the PC Card
www.gateway.com
6 Type a name for your workgroup in the Workgroup box.
Use a workgroup name of up to 15 characters with no
blank spaces. The workgroup name must be the same
for all computers in your network workgroup, and the
name must be different than any computer name on
your network.
7 Click OK to close the Identification Changes dialog box.
8 Click OK to close the System Identification dialog box.
9 After you name each computer and assign it to your
workgroup, go to “Step 3: Configuring the TCP/IP
protocol” on page 28.
8509391.book Page 27 Tuesday, August 12, 2003 12:52 PM