Gateway LWGC-220 - Manual (Page 29)

25
Step 2: Configuring the PC Card
www.gateway.com
4 Click the Identification tab.
5 Type a unique computer name in the Computer name
box. This name identifies the computer to other users
on the network. Use a computer name of up to 15
characters with no blank spaces. Each computer name
must be unique on your network. All-numeric
computer names are not allowed. Names must
contain some letters.
6 Type a name for your workgroup in the Workgroup box.
Use a workgroup name of up to 15 characters with no
blank spaces. The workgroup name must be the same
for all computers in your network workgroup, and the
name must be different than any computer name on
your network.
7 Click OK to close the Network dialog box.
8 Click X to close the Control Panel.
Important
You must give each computer on the network a
unique Computer Name and the same Workgroup
Name.
8509391.book Page 25 Tuesday, August 12, 2003 12:52 PM