GarrettCom Magnum 20X User Manual
Page 9
Data Rate: 10 Mbits / sec
Partitioning: Enforced after 32 consecutive collisions.
Reconnect: Occurs after 512 bits of error-free transmission.
Network Standards
Ethernet V 1.0/V2.0 IEEE 802.3: 10BASE-T, 10BASE5
,
10BASE2,
10BASE-FL & FOIRL, and DTE
(The Magnum 200X Two-Port Repeaters are physical layer
standard Ethernet products, and operate independently of all software.)
Maximum Ethernet Segment Lengths
DTE (AUI Drop Cable)
- 50 m (164 ft)
10BASE-T (twisted pair)
- 100 m (328 ft)
Shielded twisted pair
- 150m (492 ft)
10BASE2 ThinNet (BNC)
- 185 m (607 ft)
10BASE5 ThickNet
- 500 m (1,640 ft)
FOIRL multi-mode Fiber optic
- 1 km (3,281 ft)
10BASE-FL multi-mode Fiber optic
- 2 km (6,562 ft)
Single-mode Fiber optic
- 10 km (32,810 ft)
Connectors
200X: Two Magnum RPM ports on the front, AC power in rear.
RPMs available with standard 200X models:
RPM -TP: Shielded female RJ-45 with up -link switch
(Note: Shielded 10BASE-T connectors accept either unshielded or
shielded wiring plugs for standard twisted pair media wiring.)
RPM -BNC: ThinNet (BNC) connector with internal termination switch
RPM -AUI: D-Sub 15-Pin Female with slide lock
RPM -FST: Multi-mode fiber 10BASE-FL ST (dual "twist lock")
connector