GarrettCom Magnum 20X User Manual

Page 21

is only to be placed across pins 5 & 6. Others are not used.

JUMPER ACROSS DISTANCES SUPPORTED

1 - 2

0 - 10 km

3 - 4

not used

5 - 6

not used

Note: Be sure to use single-mode fiber optic cable with this module.

Single-mode fiber has a smaller diameter than multi-mode fiber

(2/15 - 8/60 microns for single-mode, 50/125 or 62.5/125 microns

for multi-mode, where xx/xx are the diameters of the core and the

core plus the cladding respectively).

2.3.7

RPM-DTE

The Magnum RPM-DTE is a module

equipped with a 15-pin male DTE connector

with lock posts. (The RPM -DTE is a mating

connector for the RPM-AUI which has a 15-pin

female connector and slide locks. The pin

assignments of the two are the same). The

RPM -DTE card is designed to support direct Magnum RPM-DTE

connections (no transceiver required) using AUI drop cables to any device that is equipped

with an AUI port. Examples of such devices include servers, routers, bridges, hubs, and

UNIX workstations.

1 2

3 4

5 6

DEFAULT

Partition LED

Receive LED

Standard 15-pin

male "AUI"