Goodman Mfg CPH COMMERCIAL SS-CPH90-150 - Manual (Page 2)

2 www.goodmanmfg.com SS-CPH90-150 SS-CPH90-150 www.goodmanmfg.com 3
P
roduct
S
PecificationS
P
roduct
S
PecificationS
N
omeNclature
C P H 090 030 3 B * * * A *
1 2 3 4,5,6 7,8,9 10 11 12 13 14 15 16
Revision Levels
Major & Minor
Brand Factory-Installed Options
C Commercial X No Options
A Non-powered convenience outlet
Configuration B Powered convenience outlet
P Packaged Unit C Low-ambient kit
D Return air smoke detector
Application E Supply air smoke detector
C Cooling F Non-powered convenience outlet;
G Gas Heat Low-ambient kit
H Heat Pump G Non-powered convenience outlet;
Return air smoke detector
Nominal Gross Cooling Capacity H Non-powered convenience outlet;
036 3 Tons 102 8½ Tons Supply air smoke detector
048 4 Tons 120 10 Tons J Non-powered convenience outlet;
060 5 Tons 150 12½ tons Return & Supply air smoke detectors
072 6 Tons 180 & 181 15 Tons K Non-powered convenience outlet;
090 7½ Tons 240 20 Tons Low-ambient kit; Supply air smoke detector
L Non-powered convenience outlet;
Nominal Heating Capacity Low-ambient kit
CPG CPC/CPH (Factory-Installed Electric Heat) Return & Supply air smoke detectors
045 45,000 BTU/h XXX No Heat M Powered convenience outlet;
090 90,000 BTU/h 010 10 kW 030 30 kW Low-ambient kit
115 115,000 BTU/h 015 15 kW 031 30 kW N Powered convenience outlet;
140 140,000 BTU/h 016 15 kW 045 45 kW Return air smoke detector
210 210,000 BTU/h 018 18 kW 046 45 kW O Powered convenience outlet;
350 350,000 BTU/h 020 20 kW 060 60 kW Return & Supply air smoke detectors
400 400,000 BTU/h 025 25 kW P Powered convenience outlet;
See product specifications for heat size(s) available for each capacity. Supply air smoke detector
Q Powered convenience outlet; Low-
Voltage ambient kit; Return air smoke detector
1 208-230/1/60 4 460/3/60 R Powered convenience outlet; Low-
3 208-230/3/60 7 575/3/60 ambient kit; Supply air smoke detector
T Powered convenience outlet;
Supply Fan/Drive Type/Motor Low-ambient kit; Return & Supply
B Belt Drive V 2-Speed Belt Drive air smoke detectors
D Direct Drive U Non-powered convenience outlet;
Low-ambient kit; Return air smoke detector
Factory-Installed Options V Low-ambient kit; Return air smoke detector
X No Options W Low-ambient kit; Supply air smoke detector
A Downflow Economizer Y Low-ambient kit; Return & Supply
H Disconnect Switch (non-fused) air smoke detectors
J Downflow Economizer; Disconnect Switch (non-fused) Z Return & Supply air smoke detectors
Note: Not all options available for all products. Factory-Installed Options
X Standard Aluminized Heat Exchanger
S Stainless-Steel Heat Exchanger
Factory-Installed Options
•
•
• Economizers (Downflow): Based on air conditions, can provide outside air to cool the space.
• Electric Heat Kits (CPC and CPH units only): Available in all voltage options.
• Non-powered Convenience Outlet: A 120V, 15A, GFCI outlet makes it easier for technicians to service the unit once an electrician runs power to the outlet.
• Powered Convenience Outlet: A 120V, 15A, GFCI outlet powered with a transformer built into the unit; for use when unit is not running.
When a factory-installed powered convenience outlet is installed in the equipment, the unit MCA (Min. Circuit Ampacity) will increase by 7.5A for 208/230V
units, increase by 3.75A for 460V units, and increase by 3A for 575V units. The MOP (Max. Overcurrent Protection) device must be sized accordingly.
•
• Return Air and/or Supply Air Smoke Detectors: Return air and/or supply air smoke detectors are installed in the unit.
• Two-speed Indoor Fan Blower Option: Available on 10-ton units. When the unit operates on the first stage of cooling, the fan operates at low speed to
provide 2/3 CFM airflow. When both stages of cooling operate, the blower delivers the total CFM airflow. In heating operation, the fan delivers the total CFM.
with the disconnect switch (non-fused) when it is ordered. Please note that for models with a powered convenience outlet option and a disconnect switch
(non-fused) option, the power to the powered convenience outlet will be shut off when the disconnect switch (non-fused) is in the off position.
ambient temperature to 35°F outside air temperature. On 7½- to 20-ton units, cooling operation is extended from 35°F ambient temperature
that for air conditioning (CPC units) and heat pump models (CPH units), the appropriate electric heat kit must be ordered to be factory-installed along
Stainless-Steel Heat Exchanger (CPG units only): A tubular heat exchanger made of 409-type stainless steel is installed in the unit.
Low-Ambient Kit: Allows for cooling operation at lower outdoor temperatures. On the 3- to 6-ton units, cooling operation is extended from 60°F
to 0°F outside air temperature.
Disconnect Switch (non-fused): A disconnect switch is installed in the unit and factory wiring will be complete from the switch to the unit. Please note