Gateway DC-T60 - Manual (Page 54)

50
7 If you highlighted the Single or All option, press the / buttons
to highlight Set , then press the Set button. The Locked mode icon
indicates the image is locked.
- OR -
If you highlighted the Select option, press the / /
navigation buttons to select a picture thumbnail view, then press
the
button. The Locked mode icon indicates the image is
locked. You can select additional thumbnail pictures to protect
while in this mode.
To cancel image protection:
1 Turn the camera on. See “Turning on your camera” on page 13.
2 Turn the mode dial to the Playback
mode
. The last image you took is
displayed on the LCD.
3 Select the image that you want to cancel
protection for. For more information,
see “Protect” on page 58.
4 Press the Menu button. The Playback
menu opens.
5 Press the navigation button to
highlight Protect , then press the Set
button. The Protect options are
displayed:
■ Single unprotects the image you
are currently viewing in the
Playback mode
.
■ All unprotects all of the images on
the memory card.
■ Select provides a thumbnail view
of the images on the memory
card. You can choose the image
you want to unprotect.
6 Press the / buttons to highlight one of the Protect options.
The Protect confirmation options are displayed.