Gaggenau CM200610 - Manual (Page 23)

23
System messages
The appliance indicates processes and messages
on displayĂ6.
Meaning Remedial action
ADD
WATER
No water. Pour fresh, cold water into the
water tank.
WATER
Note: There is always a small amount of water left in the
water tank.
Water tank is missing
orĂnot inserted correctly.
Insert water tank.
ADD
BEANS
No coffee beans. Add coffee beans to the bean
container 17.
BEANS
Note: The ADD BEANS display is lit until coffee
is brewed again.
FILL UP
PIPE-SYS PRESS
CAFE
Water pipe system in the
appliance is empty.
Press nbutton.
SYSTEM
TOO HOT
System heated up by
Steam on.
Allow system to cool down by
letting out some hot water
0.
EMPTY
TRAYS
Tray 23 and coffee dreg
tray 21 are full, or conĆ
tacts 25 soiled.
Remove, empty, and reĆinsert
tray 23 and coffee dreg
tray 21. Clean and dry
contacts 25.
TRAYS
MISSING
Tray 23 and coffee dreg
tray 21 are missing.
Insert tray 23 and coffee dreg
tray 21.
MISSING
Note: If coffee dreg tray 21 is missing only, the display
indicates no message.
CLEAN
UNIT
The illuminated ring on
the p button is lit
red.
Run cleaning program ć
see chapter Cleaning the
appliance".
UNIT
CALCIF.
The illuminated ring on
the m descaling
button is lit red.
Run descaling program ć
see chapter Descaling the
appliance".
FILTER
CHANGE
The filter 20 is no longer
effective after 400 brews
or approx. 2 months.
Change filter 20 (order no.
46 1732) or continue operatĆ
ing the appliance without filter.
Change settings.