Gaggenau CM200610 - Manual (Page 22)

22
DeĆactivating the setting:
q Set the time to --:-- with r ors .
Note: The current time must be set for this function to
run.
i
The switchĆon time is retained even if there
is a power failure or the main power switch 1
is turned off.
This function is used to specify after how many hours
following the last brew the appliance automatically
switches to standby mode.
q Hold down button q on display for at least
3 seconds.
q Select OFF IN with r ors.
q Press button q, hours display flashes.
q Change the setting with r or s.
q Press button q to save the setting.
q Press the o button. Back to standby.
i The switchĆoff time is retained even if there is a
power failure or the power switch 1 is actuated.
The number of brewed espressos, coffees and
preground coffees is displayed here. The number of
brews are counted automatically.
q Hold down button q on display for at least
3 seconds.
q Select NO.BREWS withr ors.
q Press the o button. Back to standby.
i This number cannot be changed!
Possible from standby" mode only
q Simultaneously hold down r and s for at least
3 seconds ć all saved settings are deleted.
i The display indicates the messages in the German
language after the RESET function.
Standby mode
OFF IN
4 HOURS
ДДДДДДДДД
ДДДДДДДДД
ДДДДДДДДД
OFF IN
2 HOURS
Displaying number
ofĂbrews
NO.BREWS
- - - 86
RESET function