Gaggenau CM200610 - Manual (Page 21)

21
The coffee temperature can be set with this function.
q Hold down button q on display for at least
3 seconds.
q Select TEMP. with r or s.
q Press button q until the display flashes.
q Change the setting with r or s.
q Press button q to save the setting.
q Press the o button. Back to standby.
The current time is programmed with this function.
This is required when using the timer function.
The time is displayed in 24h mode.
q Hold down button q on display for at least
3 seconds.
q Select TIME with r or s.
q Press button q- hours display flashes.
q Change the setting with r ors.
q Press button q- minutes display flashes.
q Change the setting with r or s.
q Press button q to save the setting.
q Press the o button. Back to standby.
The set time will be deleted
- if the main plug is disconnected,
- if the appliance is switched off with the power
switch 1,
- if there is a power failure.
The current time must be set again.
This function is used to set the time at which the
appliance automatically switches on.
q Hold down button q on display for at least 3
seconds.
q Select ON AT with r ors.
q Press button q, hours display flashes.
q Change the setting with r or s.
q Press button q, minutes display flashes.
q Change the setting with r or s.
q Press button q to save the setting.
q Press the o button. Back to standby.
Temperature
ДДДДДДДДД
ДДДДДДДДД
ДДДДДДДДД
TEMP.
normal
TEMP.
high
ДДДДДДДДД
ДДДДДДДДД
TEMP.
MAXIMUM
Current time
TIME
--:--
ДДДДДДДДД
ДДДДДДДДД
ДДДДДДДДД
TIME
14:39
Timer
ON AT
--:--
ДДДДДДДДД
ДДДДДДДДД
ДДДДДДДДД
ON AT
07:45