Gaggenau CM200610 - Manual (Page 15)

15
q Push down the sleeve a on nozzle.
q Place an appropriate cup under the nozzle.
q Rotate function selector to 0 and fill the cup.
d WARNING d
Avoid the risk of scalding!
When the function selector is set
to 0, the nozzle may spurt slightly.
Escaping water is very hot. Do not
touch nozzle or direct at people!
q End the process by rotating the function selector
backĂto u position.
q Push up the sleeve a on nozzle
q Immerse nozzle deep into the liquid which
isĂtoĂbeĂheated.
q Slowly rotate function selector to =.
The appliance now heats up for approx.
20 seconds. ThenĂthe liquid is heated.
d WARNING d
Avoid the risk of scalding!
When the function selector is set
to =, the nozzle may spurt slightly.
Escaping steam is very hot. Do not
touch nozzle or direct at people!
q End the process by rotating the function selector
backĂto u position.
Note: When nozzle has cooled down, clean
immediately.
Dried residue is difficult to remove.
Preparing hot water
Steam for heating
drinks