Grizzly Extreme Series Bandsaw G0514X - Manual (Page 55)

G0514X/-X2/-X2B/-X3 (Mfg. Since 2/12)
-53-
To lubricate the blade guide rack and pinion:
1. disConneCt BandsaW FroM poWer!
2. lower the blade guide until it reaches the
table.
3. using a rag and mineral spirits, wipe off any
existing grease and sawdust buildup on the
rack (see
figure 91).
Blade Guide Rack and pinion
Lubricant frequency Qty
Multi-purpose
gl2 grease as needed thin Coat
Tension Adjustment Assembly
Lubricant frequency Qty
Multi-purpose
gl2 grease as needed thin Coat
To lubricate the tension adjustment assem-
bly:
1. disConneCt BandsaW FroM poWer!
2. open the top wheel cover and look through
the top of the wheel.
3. using a rag and mineral spirits, wipe off any
existing grease and sawdust buildup on the
blade tension adjustment assembly and ten-
sion lever cam.
4. apply a thin coat of multi-purpose gl2 grease
to the tension adjustment assembly and ten-
sion lever cam (see
figure 92).
4. apply a thin coat of multi-purpose gl2 grease
to the rack.
5. Move the blade guide up and down several
times and remove any excess grease to help
prevent sawdust buildup.
figure 91. example of rack lubrication location.
figure 92. example of tension adjustment
assembly locations (top wheel removed for
clarity).