User instructions, Cleaning the fire, Arrangement of fuel bed components – Stovax PR0696 User Manual

Page 5

can be fitted by anyone capable of simple DIY jobs and

requires no special training. This upgrade can be obtained

through your local Gazco stockist.

5.2 STANDARD REMOTE CONTROL This remote control can

control the fire after the pilot has been lit. It can turn the

main burner on and regulate it from low through to high and

back again. It can turn the main burner off leaving the pilot

burning GAZCO PART NUMBER 8455.

6. ClEANING ThE FIRE

6.1 Remove the ceramic coals or pebbles and place on a dry,

clean surface. Remove the fuel bed and the burner cover

gasket.

6.2 Clean the burner and tray assembly using a vacuum cleaner

with soft brush attachment, ensure all debris is removed from

the burner ports.

6.3 Replace the ceramics by referring to section 7.

7. ARRANGEMENT OF FUEl BED

COMPONENTS

NOTE: CERAMIC PARTS ARE FRAGIlE. ThE SIDE AND

REAR PANElS ARE REvERSIBlE. ONE SIDE IS PlAIN, ThE

OThER SIDE IS REEDED. ASk ThE CUSTOMER WhICh

SIDE IS PREFERRED AT ThIS STAGE.

ONlY USE ThE CORRECT TYPE AND QUANTITY OF

CERAMIC COMPONENTS. POINTS 7.1 TO 7.5 ARE

COMMON TO All FUEl TYPES AND lAYOUTS.

7.1 Position the burner cover gasket on the burner skin ensuring

the holes align with the ports. Take care as the front

left-hand hole is offset compared to the others.

See diagram 3, arrow A.

AR1175

7.2 Position the flame baffle centrally on the tray and ensure the

stepped lower edge engages against the rear edge of the

burner skin. See diagram 4.

AR1159

7.3 Place the rear panel against the rear of the box and slide

the side panels on either side of the flame baffle. Ensure they

locate in the brackets at the top of the firebox. DO NOT

SLIDE THEM ALL THE WAY BACK. See diagram 5.

AR1161

7.4 Locate the top panel on top of the rear and side panels.

Finally push the sides fully towards the rear panel. This will

retain the top panel. See diagram 6.

AR1162

7.5 Place the front coal centrally in the channel at the front of

the tray. See diagram 7. The relationship between the front

coal and flame baffle is shown in diagram 7.

AR1160

AR1163

USER INSTRUCTIONS