Stovax PR0696 - Manual (Page 16)

16
INSTAllATION INSTRUCTIONS
INSTAllATION
two small coals. These coals should touch the rear panel.
See diagram 17.
17
AR1168
7.10 Finally place five large coals between the second and rear
row of coals. See diagram 18.
18
AR1169
7.11 It is essential that gaps are left between the coals to maximise
the performance of the appliance.
PEBBlE lAYOUT - CURvED AND FlAT FRONTS
7.12 All ThE PEBBlES hAvE AN ID NUMBER ON ThE
UNDERSIDE. ENSURE ThE PEBBlES ARE PlACED ONlY
IN ThEIR CORRECT POSITIONS .
7.13 Place the first row of pebbles on top of the front coal resting
against the frame front. All the numbers must be placed
face down so they cannot be seen. See diagram 19.
19
AR1171
7.14 Working from the outer edges, place the second
row of pebbles against the rear of the first row. Note the
orientation of each pebble, as this is important to the
performance of the fire. See diagram 20.
20
AR1172
7.15 Place the rear row of pebbles on top of the flame baffle,
these must touch the rear panel. See diagram 21.
21
AR1173
7.16 Place the remaining five pebbles between the second and
rear rows. See diagram 22
22
AR1174
6 5 4 5 2