GE E4H Series - Manual (Page 30)

2. Remove all the membrane elements from the membrane element housings in the
direction of flow, where possible. If necessary, a membrane element can be
removed against the direction of flow. A heavy duty pliers or channel lock pliers
may be necessary to pull the old membrane element our of the membrane element
housing.
3. To reinstall replacement membrane elements, follow Steps 4 -14 (Section 4.6,
Membrane Element Installation).
NOTE: Do not operate the machine on water over 85°F (29°C).
NOTE: Do not allow the machine to freeze unless it is totally drained. The
machine must thaw a minimum of 24 hours before starting.
24