Grizzly G0459P - Manual (Page 15)

Model G0459/G0459P (Mfg. 7/11+)
-13-
SEctiON 3: SEtUP
the following are needed to complete the setup
process, but are not included with your machine.
Description Qty
•
safety glasses ........................................... 1
• additional people ....................................... 1
• screwdriver phillips #2 ............................... 1
• dust Collection system .............................. 1
• dust hose 2 1 ⁄
2
" ........................................... 1
• hose Clamps 2 1 ⁄
2
" ...................................... 2
• lag bolts 5 ⁄
16
-18 x 40 (not included) .......... 4
• open end Wrench or socket 1 ⁄
2
” ................ 1
• drill ............................................................. 1
• drill bit 1 ⁄
4
” ................................................... 1
Needed for Setup
inventory
box 1: (figure 3) Qty
A. drum sander (not shown) .......................... 1
b. Crank handle ............................................. 1
c. dust port 2 1 ⁄
2
" ............................................. 1
D. hex Wrench 3mm ....................................... 1
Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover any damage, please call us immediately
at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
Unpacking
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
figure 3. g0459/g0459p inventory.
C
b d
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Wear safety glasses dur-
ing the entire setup pro-
cess!
this machine and its com-
ponents are very heavy.
Get lifting help or use
power lifting equipment
such as a forklift to move
heavy items.
to reduce your risk of
serious injury, read this
entire manual bEfORE
using machine.