GIGABYTE GN-A11G User Manual

Page 42

GN-A11G Wireless LAN Access Point

IP Address

Assign an IP address to the AP with this option. The default IP address is
192.168.1.1. Please make sure the assigned IP address is exclusive for the
AP.

Subnet Mask

Please assign a Subnet Mask for an AP. The default Subnet Mask is
255.255.255.0.

Gateway

Please enter the IP address for the default router. The default gateway is
192.168.1.254.

After changing the IP address for AP, please change the PC’s IP address (AP
Manager) so that both have the same Subnet Mask. Then, click “Find Access
Point” icon; AP Manager willl find APs on the network.

DHCP Mode

4 options are available: “Disabled”, “Client Enabled” , “Server Enabled” and
“Auto”. The default value is “Disable”.

If you want to obtain IP addresses from a DHCP server, select “Client
Enabled”. To use an AP as a DHCP server and assign a dynamic IP
address automatically on the network, select “Server Enabled”. If you are
not sure DHCP server is available on the network and wish to use an AP as
DHCP server, please select “Auto”.

DHCP Client Range & DNS

When “Server Enabled” is selected, please enter the range of your IP
addresses and DNS. DNS information is provided by your ISP.

802.1d Spanning Tree

When the 802.1d Spanning Tree function is enabled, the circuit problem
among multi APs or routers in the network can be avoided. The default value
is “Disable”.