GIGABYTE GN-A11G - Manual (Page 29)

GN-A11G Wireless LAN Access Point
WDS Operation Mode
The Access Point supports three operation modes: “Access Point”, “Point to
Point” and “Point to MultiPoint”. The default operation mode is “Access Point”.
Access Point
The operation
mode is set to
“Access Point”
by default. This
connected your
wireless PC to a
wired network. In
most cases, no
change is
necessary.
Point to Point
Only one Access
Point can be
assigned to
connect with
WDS in the
“Point to Point”
mode.
In this WDS
supported mode,
the Access Point
can communicate
with other
GIGA-BYTE
Access Point that
is also set to
“Point to Point”
mode. You have
to enter MAC
address of the
host AP.
29