GIGABYTE GN-A11G - Manual (Page 21)

GN-A11G Wireless LAN Access Point
DHCP Mode
4 options are available: “Disabled”, “Client Enabled” , “Server Enabled” and
“Auto”. The default setting is Auto.
If you want to obtain IP addresses from a DHCP server, select “Client
Enabled”. To use an AP as a DHCP server and assign a dynamic IP
address automatically on the network, select “Server Enabled”. If you are
not sure DHCP server is available on the network and wish to use an AP as
DHCP server, please select “Auto”.
DHCP Client Range & DNS
When “Server Enabled” is selected, please enter the range of your IP
addresses and DNS. DNS information is provided by your ISP.
802.1d Spanning Tree
When the 802.1d Spanning Tree function is enabled, the circuit problem
among multi APs or routers in the network can be avoided. The default value
is “Disable”.
Confirm your desired settings and press “Apply” button to save the settings in
the AP.
21