Grandstream Networks DUAL ETHERNET PORT BT200 - Manual (Page 11)

T ABLE 5: K EYPAD B UTTON D EFINITIONS
Key Button Key Button Definitions
UP ↑
Use button to select next “Menu Item” when phone is in keypad configuration mode; Or
increase handset/speakerphone volume when phone is ACTIVE; Or increase ring volume
when phone is in IDLE mode
DOWN ↓
Use button to select previous “Menu Item” when phone is in keypad configure mode; Or
decrease handset/speakerphone volume when phone is ACTIVE; Or decrease ring volume
when is in IDLE mode
MENU
Enter keypad MENU mode when phone is in IDLE mode.
It is also the ENTER key once entering MENU
CALLED
After off hook, press to display the dialed numbers. When number displayed, press the
SEND key can make call using that displayed number
CALLERS
After off hook, press to display the incoming Caller IDs. When number displayed, press the
SEND key can make call using that displayed number
MSG Enter to retrieve (video) voice mails or other messages
HOLD Place ACTIVE call on hold
TRNF TRANSFER key: Transfer an ACTIVE call to another number
CONF Press CONF button to connect Calling/Called party into conference
FLASH Flash to switch between two lines
SPEAKER Enable/Disable hands-free speaker mode
SEND
Press SEND to dial a new number or redial last number dialed. Press send button to send
a call immediately before “no key entry timeout” value expires
MUTE/DEL
Mute an active call; or Delete a key entry
Also used to ‘REJECT’ incoming call.
0 - 9, *, # Standard phone keypad; press # key to send call; * key for special needs
Grandstream Networks, Inc. BT200 User Manual Page 11 of 37
Firmware 1.1.1.14 Last Updated: 12/2006