GE 164D2966P126 - Manual (Page 38)

(continued
PROBLEM
OVEN WILL NOT
SELF-CLEAN
OVEN DOOR WILL
NOT OPEN
OVEN NOT CLEAN
CLEAN CYCLE
“door” APPEARS
IN THE DISPLAY
“OFF” APPEARS
IN THE DISPLAY
OVEN CONTROL SIGNALS
ENTERING SELF-
CLEAN OR STOP TIME
OVEN TEMPERATURE
TOO HOT OR TOO COLD
“BURNING” OR “OILY”
ODOR EMITTING FROM
OVEN WHEN TURNED ON
STRONG ODOR
FAN NOISE
POSSIBLE CAUSE
Temperature is high to set Self-Clean operation. A11ow the oven to cool, and
reset the controls.
●
Probe is in the oven. Remove the probe.
●
Oven must cool below locking temperature.
●
Oven controls not Review Operating the Self-Cleaning Oven section.
●
Heavily soiled require to 4-hour Clean Time.
●
Heavy cleaned up before starting cycle.
●
Oven door not Self-Clean cycle selected.
●
Door is still , are trying to enter an oven cooking operation.
Oven is too 1.01
or Broil soon after
●
Other oven is in
●
Child Lockout is turned on.
●
This is reminding enter a bake temperature.
●
This is reminding you close the oven door.
●
The oven thermostat adjustment. See the Adjust the Oven Thermostat— —
It section.
●
This is normal in a new oven disappear in time. To speed the process,
set a self-clean cycle for a minimum of 3 hours. See the Operating the
Self-Cleaning Oven section.
●
An odor from the insulation around the inside of the oven is normal for the
first few times the oven is used. This is temporary.
●
A fan may automatically turn on and off to cool internal parts. This is normal
and the fan may continue to run after the oven is turned off.
If you need more help. toll free:
GE Answer
800.626.2000
consumer information service