GE 164D2966P126 - Manual (Page 36)

AND
(continued) —
Probe
The temperature probe may be cleaned with soap and
water or a soap-filled scouring pad. Cool the
temperature probe before cleaning. Scour stubborn
spots with a soap-filled scouring pad, rinse and dry.
Do not immerse the temperature in water.
Do not store the temperature probe in the oven.
Oven Light Replacement
CAUTION: Before replacing your oven light bulb,
disconnect the electrical power for your oven at
the main fuse or circuit breaker panel. Be sure
let the light cover and bulb completely before
removing or replacing them. When in use, light bulbs
-
can become warm enough to break if touched with a
moist cloth or towel. When cleaning, avoid touching
)
warm lights with cleaning cloths the light cover is
removed.
The oven light is covered with a removable glass
I
cover which is held in place with a wire. Remove
Wire cover
oven door, if desired, to reach the cover easily.
To remove:
your hand under the cover so it doesn’t fall
when released. With fingers of the same hand, firmly
push back the wire cover holder. Lift off the cover.
DO NOT REMOVE ANY SCREWS.
Replace bulb with 40-watt home appliance bulb.
To replace cover:
it into the groove of the light receptacle. Pull
wire forward to the center of cover until it snaps in
place. When in
the wire holds the cover firmly.
Be certain the wire is in the depression in the center of
the cover.
Connect the electrical power to the oven,
Oven Heating Elements
Do not clean the bake element or the broil element. Broil Element
Any burn off when the elements are heated.
The bake element can be lifted to clean the
oven floor. If residue or ash accumulate Bake Element
around the bake element gently wipe around the
element with warm water.
36