GE 164D2966P126 - Manual (Page 37)

It’s a good idea to wipe the control panel after each
use. Clean with mild soap
water or vinegar
water, rinse with clean water polish dry with a
soft cloth.
Do not use abrasive cleansers, strong liquid
cleaners, plastic scouring pads or oven cleansers
on the control panel—they will damage the finish.
A
solution of vinegar and hot water works well.
Glass Window
To clean the outside of the oven window, a
cleaner. polish with a dry
Do not the water or cleaner to run down
inside the openings in the glass or the openings in
the top of the oven door while cleaning.
Metal Parts
Do not use steel wool, abrasives, ammonia or
commercial oven cleaners. To
clean surfaces:
wash, rinse then dry with a soft cloth.
QUESTIONS?
●
USE THIS PROBLEM SOLVER
PROBLEM
A
FLASH
THE DISPLAY
OVEN WILL
NOT WORK
OVEN LIGHT
NOT WORK
FOOD DOES NOT
BROIL PROPERLY
POSSIBLE CAUSE
●
This is the function error code. Press the pad. Allow oven to
cool 1 hour. Place oven back into operation. If function error occurs again,
disconnect power to the oven and call
service.
●
The circuit breaker in your house has been tripped, or a fuse has been blown.
●
Oven controls not properly set.
●
Light bulb is loose or defective. Tighten or replace.
●
Pad operating oven light is broken. Call for service.
●
The oven controls are not properly set. See the Broiling section.
●
The door not left ajar as recommended.
●
Improper shelf position being used.
●
Food is being cooked on a hot pan.
●
Cookware is not suited for broiling.
●
Low voltage. See the section.
●
Aluminum used on the broiler
slit as recommended.
has not been fitted properly
●
oven controls are not properly set. See the Baking or Roasting section.
is not correct.
●
Incorrect cookware of improper size is being used.
●
The oven thermostat needs adjustment. See the Adjust the Oven
Do section.
37