Gateway M460 User Manual
Page 62
56
www.gateway.com
Chapter 4: Using Drives and Ports
6
Click the
Settings
tab.
7
Right-click the second monitor icon (labeled 2), then click
Attached
.
8
Click
Apply
.
9
Adjust properties such as
Screen Resolution
or
Color Quality
if
necessary.
10
Click
OK
.
Important
Press
F
N
+
F4
to switch between viewing the display on the
LCD panel and viewing the display on the projector or
monitor.
Important
If an external monitor or projector is connected and you
close the LCD panel, your notebook may turn off the LCD
panel, but will not enter Standby mode.