G.10 rescanning all channels – Galaxy Metal Gear 65 User Manual
Page 227
Configuring Galaxy 65
207
3
Select the option you want and press Enter.
G.10 Rescanning All Channels
You can tell the Galaxy 65 Subsystem to scan all disk channels for new or removed disk drives. You can
use this option when you install or remove drives. The rescan temporarily pauses all I/O processes and
then resumes normal operation.
If you are using an enclosure with an EMP, the Galaxy 65 will perform a rescan automatically. With an
EMP, the EMP detects the change in drive status and updates the Galaxy 65 about removed drives
almost immediately; however, installed drives will be detected after a three-minute delay. This delay is to
allow the new drives to spin up.
To rescan all channels:
1
From the System Menu, select Utilities Menu and press Enter.
The Utilities Menu displays.