Galaxy Metal Gear 65 - Manual (Page 107)

Galaxy 65 Troubleshooting
87
7.21 Spare Parts and Ancillary Items
The following replaceable parts are available for the Galaxy 65 Subsystem:
7.22 Upgrading Your LRC I/O Modules
You can upgrade your existing JBOD or RAID LRC module to a Rorke Data Galaxy 65 RAID LRC module
in accordance with the following procedure:
Caution Ensure that your Power Supply/Cooling modules are marked with P/N 44191-XX. If they are not you will
need to upgrade your PSUs. Please contact your supplier and request the upgrade modules.
1 Change the Ops Panel switch settings to those shown in Table 7–9 .
Important Switch settings are only read at Power On.
The Galaxy 65 enclosure ID must always be set to select ID1.
2 Remove the existing LRC modules in accordance with the procedure in 7.12.3.1, ”Removing the Module”,
on page 72 .
3 Install the Storage Manager modules in accordance with the procedure in 7.12.3.2, ”Inserting the
Module”, on page 73 .
• Chassis (including Backplane) – RS232 cable
• AC Power Supply/Cooling Module – LAN cable
• Drive Carrier Module • 19 inch rack mounting rail kit
• Storage Manager Module • Dummy Carrier Module
• External FC-AL Signal Cables • Blank SM Module
• Cables • SFP module, optical
– LC - LC optical cable • SFP module, copper
– LC - SC optical cable • Battery, Li-ion
– SFP - SFP copper patch cable (1 M length) • (Country specific) power cords
– HSSDC2 - HSSDC1 • Bifurcated power cords
– HSSDC2 - DB9 • Keys for Drive Carrier modules.
– HSSDC2 - HSSDC2 • All documentation