Grizzly G4015Z - Manual (Page 33)

-31- G4015Z Lathe/Mill
It is vital that you become familiar with the control
panel before operating the Model G4015Z.
Power to the motor is controlled through a series
of switches mounted on the
Lower Belt Guard .
Figure 37 shows the various buttons and light.
Please examine the layout and note the list of
functions to the right before running the
lathe/mill.
Figure 37. Control panel components.
Control Panel
1
2
3
4
5
1. Power indicator light – shines when power is
turned on using the system reset switch.
2. Motor off button – turns motor off.
3. Motor on button – turns motor on.
4. Reversing switch – selects direction of rota-
tion for spindles. Lift the cover to access the
switch. Pushing the button on the left hand
side allows the motor to operate in the for-
ward direction. Push the button on the right
hand side and the motor reverses.
5. System reset – disconnects power from sys-
tem. Rotate the button and allow to pop out.
In the event of an emergency, the button can
be depressed and all power to the motor will
be turned off.
SECTION 9: OPERATIONS