Grizzly G4015Z - Manual (Page 11)

G4015Z Lathe/Mill -9-
Lifting Machine
The Model G4015Z requires the use of lifting
equipment such as a fork lift, engine hoist or
boom crane.
Do Not lift the machine by hand.
See the warning at the right. Used in conjunction
with lifting straps and following safe lifting proce-
dures as detailed by the manufactures of these
lifting devices, the lathe/mill can be safely lifted
off of the pallet and placed on a sturdy work
bench.
Do Not lift the machine from any other points
than those pictured in Figure 2.
The Model G4015Z is a
heavy machine, 440 lbs.
shipping weight. DO
NOT move the machine
by yourself – you will
need assistance and
power equipment.
Serious personal injury
may occur if safe moving
methods are not fol-
lowed.
If moving this machine
up or down stairs, the
machine must be dis-
mantled and moved in
smaller pieces. Make
sure floor and stair
structures are capable of
supporting the com-
bined weight of the
machine parts and the
people moving them.
Figure 2. Use only these lifting points.