GE 28118 - Manual (Page 41)

41
OUT OF RANGE Indicates handset is too far from the base. Move closer to the base.
ROOM MONITORING.... The audio link between handsets is established.
PAGING or
Someone pressed the page button on the base or del/ intercom/conf
PAGING FROM button on the handset
REPT Repeat call message. Indicates that a new call from the same
number was received more than once.
SEARCHING Indicates handset is searching for the base.
SPKR Indicates the handset is in speakerphone mode.
UNKNOWN NAME/ The incoming call is from an area not serviced by Caller ID
CALLER/NUMBER or the information was not sent.
Answering System Display Messages
The following messages show the status of the answering system or help you set up and use
the system.
0-59 Indicates the total number of messages.
CL (blinking) The voice time/day stamp needs to be set.
- - Answering system is turned off.
An (blinking) The system is answering a call.
F (blinking) Answering system memory is full.
Six bars (blinking) The system is recording a memo or an announcement.
LA (Line Access) External line remote answering system.
Handset Sound Signals
Signal Meaning
A long warbling tone (with ringer on) Signals an incoming call
Three short beeps (several times) Page signal
Single beep every 7 seconds Low battery warning