GE 28118 - Manual (Page 26)

6
- Press the vol/CID ( 5) to review the oldest call and scroll toward the most recent calls
(higher numbers).
- Press the vol/CID ( 6 ) to review the newest call and scroll to older calls (lower numbers).
NOTE: You may choose from the last three numbers that were dialed.
4. Press the talk button. The number dials automatically.
If you get a busy signal and want to keep dialing the number, press the redial button to quickly
redial the number.
Exit
Press the end button to exit a menu function and return to the standby screen.
Page
The page feature helps you locate a misplaced handset. To send and receive pages, all
handsets must be registered. If your handset is not registered, follow the instructions in the
Registration section of this manual.
Handset Paging
(applicable only with additional handsets)
1. Make sure the phone is OFF (not in talk mode).
. Press and release the del/conf/intercom button on a handset. PAGING EXTENSION? shows
in the display.
3. Use the touch-tone pad to enter the handset number you want to page. (1= to page
Handset 1, =to page handset , etc., or
*
=to page all handsets)
4. To cancel the page, press the end, del/conf/intercom button on the originating handset, or
press the talk button on the receiving handset.
Base Paging
Use the base to page all registered handsets at the same time.
1. Press the page button on the base. All handsets beep for two minutes, and
PAGING FROM
BASE shows on each handset’s display.
. To cancel the page, press the page button on the base, or press the talk or the end button
on each handset.