GE 28118 User Manual

Page 20

3. Use the touch-tone pad to enter the selection, or use the vol/CID (6 or 5) button to scroll

to the

1ON or 2OFF. The default setting is 2OFF.

4. Press the menu ok/mute button to confirm. You will hear a confirmation tone and the new

setting shows in the display.

Rings to Answer (for answering system)

This feature lets you select the number of times you want the phone to ring before the

answering system answers a call.
From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the

RING TO ANSWER sub-menu.

. Press menu ok/mute button to enter the menu.

RING TO ANSWER 3 4 5 6 TS shows in the

display.

3. Use the vol/CID ( 6 or 5) button to scroll to the your selection. The default setting is

4. Press the menu ok/mute button to confirm. You will hear a confirmation tone and the new

setting shows in the display.
NOTE: If you select Toll Saver (TS) the unit answers after the 3rd ring if

there are NEW messages, OR the unit answers after the 5th ring if there

are NO new messages. This allows user to access their answerer from

another location and then hang up after 4 rings to save long distance

charges.

Security Code (for answering system)

You can access the answering system from a tone dialing telephone in another (remote)

location. The security code is required for remote access, and it prevents unauthorized access

to your answering system.
From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the

SECURITY CODE sub-menu.

. Press menu ok/mute button to enter the menu.

SECURITY CODE 1 2 3 shows in the display.

3. Use the touch-tone pad to enter your new 3-digit security code. The default setting is 123.
4. Press the menu ok/mute button to confirm. You will hear a confirmation tone and the new

security code shows in the display.
NOTE: If you make a mistake, use the del/conf/intercom button to delete

the security code and begin again.