GE 28118 - Manual (Page 38)

38
. Enter the security code during the outgoing announcement or after you hear the tone.
NOTE: The default security code is 123
3. Follow the voice menu to use the answering system’s remote functions.
The remote feature lets you perform the following functions:
To
Press this button
Review message 1
Play back messages
Stop message playback
Erase message 0 (during message playback)
Skip message 3
Turn off/on answerer 4
Review voice menu options 7
Memory Full
When answering system memory is full, the system answers after 10 rings, beeps and waits for
you to enter the 3-digit security code. If you don’t enter the security code within 8 seconds, the
phone hangs up.
You should erase some messages so the answering system can record new messages.
NOTE: The unit also answers after the 10th ring if it is turned off. To access
the answering system, enter your 3-digit security code.
Changing the Battery
CAUTION: To reduce the risk of fire or personal injury, use only the
Thomson Inc. approved Lithium battery model 5-2770 or 5-2762, that is
compatible with this unit.
1. Make sure the telephone is OFF (not in TALK mode) before you replace battery.
. Remove the battery compartment door.
3. Disconnect the cord attached to the battery pack and remove the battery pack from the
handset.
4. Insert the new battery pack and connect the cord to the jack inside the battery
compartment.