GarrettCom S14 - Manual (Page 62)

S14 & PS14P (PoE) Convenient Switches Installation and User Guide
53 www GarrettCom com . .
3.7.1 Power Requirement for PS14P(PoE) Power Source Switch
POWER INPUT: Total Power Consumption: 66 watts max. (1.4A @48VDC)
Terminal block for -48v DC input (range of 46 to 60V dc), built in for +, - , ground.
Note: The 8-15V DC option is also present, but can only be used to power the
PS14P(POE) unit when no PoE devices are attached. The device will not function as PoE
Switch while powered up via 12VDC power, but as a normal non-PoE Switch.
POWER OUTPUT:
PoE available on all four RJ-45 ports via Ethernet twisted pair cabling on port pins using
spare pairs 4,5(+) 7,8(-), not the data pair 1,2(-), 3,6(+)
802,3af Power Consumption: 61.6 watts max.
(15.4(max)/port)
PoE Ports Output voltage: 44 to 57 VDC
Over Current Protection, per port: reset able fuse
Power Consumption: Typical 3 watts, 4 watts max.
Note: Din-Rail mounted, Powerful -48vdc supply used for Magnum PS14P(POE) can be
bought directly using this URL:
http://www.lanstore.com/ps.htm