GarrettCom S14 - Manual (Page 33)

S14 & PS14P (PoE) Convenient Switches Installation and User Guide
24 www GarrettCom com . .
2.3 Magnum PS14P & S14-Series, with four (RJ-45) Copper ports
The Magnum S14-Series & PS14P chassis house one main PC board. The power
supply is an external AC unit or internal DC via a screw terminal block. The front side of
the chassis has three twisted-pair switched ports and one port is provided on the rear side.
All four ports of the S14-Series convenient switch support auto-cross (MDIX), and perform
the auto-cross in the auto-negotiation mode only.
Dual LEDs indicating the operating status of ports are mounted on the top as well
as end for convenience and may be viewed from any direction. There are power (PWR)
indicators for the unit to validate that the unit is turned ON. For each port, there are Link
and Activity (LK/ACT) LEDs indicating traffic that are mounted on the top of the unit as
well as the end. LEDs mounted next to each port indicate (LK/ACT as LA1, LA2, LA3,
LA4), 10/100 (ON for 100Mbps), and full/half duplex (F/H is ON for full duplex).