GarrettCom S14 User Manual
Page 16
S14 & PS14P (PoE) Convenient Switches
Installation and User Guide
7
www GarrettCom com
.
.
POWER INPUT: (PS14P(POE) unit only)
Total Power Consumption: 66 watts max. (1.4A @48VDC)
Terminal block for -48v DC input (range of 46 to 60V dc), built in for +, - , ground. The 8-
15V DC jack is also present, but it can only be used to power the PS14P unit itself, not PoE
devices attached.
POWER OUTPUT: (PS14P(POE) unit only)
PoE available on all four RJ-45 ports via Ethernet twisted pair cabling on port pins using
spare pairs 4,5(+) 7,8(-), not the data pair 1,2(-), 3,6(+)
802,3af Power Consumption: 61.6 watts max. (15.4(max)/port)
PoE Ports Output voltage: 44 to 57 VDC
Over Current Protection, per port: resettable fuse
Port Connectors:
RJ-45 Port: Auto-cross(MDIX), 100BASE-TX and 10BASE-T:shielded 8-pin
female. Three RJ-45 ports provided in front, and one on the rear. Supports shielded
(STP) and unshielded (UTP) Cat 3, 4, 5 cable. For PoE pass-through option on P
models, use Model # PS14P.