FUJITSU MHW2060AC User Manual
Page 133
5.3 Host Commands
•
Feature Flags
Table 5.20 Selective self-test feature flags
Bit Description
0
Vendor specific (unused)
1
When set to one, perform off-line scan after selective test
2
Vendor specific (unused)
3
When set to one, off-line scan after selective test is pending.
4
When set to one, off-line scan after selective test is active.
5...15 Reserved
Bit [l] shall be written by the host and returned unmodified by the device. Bit [3:4]
shall be written as zeros by the host and the device shall modify them as the test
progress.
•
Selective Self-test pending time [min]
The selective self-test pending time is the time in minutes from power-on to the
resumption of the off-line testing if the pending bit is set.
C141-E258
5-57
This manual is related to the following products: