Furuno GP-1650WD User Manual

Color dgps/plotter color gps/plotter

This manual is related to the following products:

GP-1650W

Table of contents

Document Outline

SAFETY INSTRUCTIONS
TABLE OF CONTENTS
FOREWORD
SYSTEM CONFIGURATION
WHAT IS WAAS?
1. OPERATIONAL OVERVIEW
- 1.1 Display Unit Controls
- 1.2 Inserting Mini Chart Card
- 1.3 Turning the Power On/Off
- 1.4 Adjusting Tone and Brilliance
- 1.5 Plotter Displays
- 1.6 Steering/Highway Displays
- 1.7 Menu Operation, Soft Keys
- 1.8 Demonstration Display
2. PLOTTER DISPLAYS
- 2.1 Presentation Modes
- 2.2 Cursor
- 2.3 Shifting the Display
- 2.4 Displaying Nav Information Window
- 2.5 Selecting Chart Scale/Range
- 2.6 Mini Chart Cards
- 2.7 Navigation Data Display
- 2.8 Steering Display
- 2.9 Highway Display
- 2.10 Changing Operation Mode
- 2.11 Navigation Trip Distance
3. TRACK
- 3.1 Displaying Track
- 3.2 Stopping/Restarting Plotting of Track
- 3.3 Changing Track Color
- 3.4 Track Plotting Method, Interval
- 3.5 Changing Track Memory Capacity
- 3.6 Erasing Tracks
4. MARK
- 4.1 Entering Marks
- 4.2 Changing Mark Attributes
- 4.3 Changing Mark Size
- 4.4 Erasing Marks
- 4.5 Displaying Track and Mark Points
- 4.6 Target Mark
5. WAYPOINTS
- 5.1 Entering Waypoints
- 5.2 Erasing Individual Waypoints
- 5.3 Changing Waypoint Data
- 5.4 Changing Waypoint Position on the Plotter Display
- 5.5 Waypoint Mark Size
- 5.6 Searching Waypoints
6. ROUTES
- 6.1 Entering Routes
- 6.2 Connecting Routes
- 6.3 Inserting, Removing Waypoints
- 6.4 Creating Track-based Routes
- 6.5 Erasing Routes
7. NAVIGATION
- 7.1 Navigating to “Quick Points”
- 7.2 Navigating to Waypoints (waypoint list)
- 7.3 Navigating to Ports, Port Services
- 7.4 Following a Route
- 7.5 Canceling Navigation
8. PLOTTER ALARMS
- 8.1 Introduction
- 8.2 Audio Alarm On/Off
- 8.3 Arrival Alarm
- 8.4 Anchor Watch Alarm
- 8.5 XTE (Cross Track Error) Alarm
- 8.6 Speed Alarm
- 8.7 Proximity Alarm
- 8.8 Alarm Information
9. MEMORY CARD OPERATIONS
- 9.1 Formatting Memory Cards
- 9.2 Saving Data to Memory Card
- 9.3 Loading Data from Memory Card
10. CUSTOMIZING YOUR UNIT
- 10.1 CHART SETUP OPTIONS menu
- 10.2 DISPLAY OPTIONS menu
- 10.3 GPS/DGPS/TD OPTIONS menu
- 10.4 CONFIGURATION menu
11. USING C-MAP NT MODEL
- 11.1 Inserting Chart Card
- 11.2 Cursor and Data Display
- 11.3 Tidal Information
- 11.4 Navigating to Ports, Port Services
- 11.5 Setting Chart Setup Options
- 11.6 Selecting Chart Scale/Range
- 11.7 Displaying Program Number
12. MAINTENANCE & TROUBLESHOOTING
- 12.1 Maintenance
- 12.2 Replacement of Fuse, Battery
- 12.3 Simple Troubleshooting
- 12.4 Error Messages
- 12.5 Diagnostic Tests
- 12.6 Clearing Memories
APPENDIX
- MENU TREE
- LORAN C CHAINS
- DECCA CHAINS
- WORLD TIME
- GEODETIC CHART LIST
SPECIFICATIONS
INDEX
DECLARATION OF CONFORMITY