FUJITSU Image Scanner fi-5950 - Manual (Page 12)

3
■ Indications on the Function
Number Display
The following shows the indications on the Function
Number Display.
Use this button to start linked applica-
tion.
When this button is pressed during
scanning operation, the scanning is
cancelled
(*About the settings, refer to the "fi-
5950 Operator’s Guide" on the SETUP
DVD-ROM).
Use this button to turn the power ON/
OFF.
When the power is turned on, the but-
ton is illuminated in blue.
HINT
Operator Panel Overlays are available in
French, German, Italian, Spanish, and Chi-
nese (Simplified). To change the overlay,
open the plastic cover.
Name Function
Scan
nd t
Thin
Send to
Scan
No. Descriptions
Lights only one time upon turning on the scanner.
Indicates that the scanner has been turned ON
and is being initialized.
Indicates that initialization has been completed
successfully.
This status is called "Ready Status."
or
Indicates that a temporary error (that users can
solve) has occurred during the initialization or
scanning of documents.
"J" or "U" and an error number (1, 2, 4, 6, 8, 0)
are displayed alternately.
To return the scanner to the ready status ("1"),
press the "Scan" or "Send to" button while the
error is indicated.
Indicates that a device alarm (that users can not
solve) has occurred during the initialization or
scanning of documents.
"E" and an alarm number (0, 2 to 9, and A, c, d,
F, 10 to 12, 15 to 19, 1A, 1b) are indicated alter-
nately.
To return the scanner to the ready status ("1"),
press the "Scan" or "Send to" button.
If this alarm occurs, turn the power off and then
on again. If the alarm is indicated after turning on
the power again, contact your service engineer.