FUJITSU fi-4120C2 - Manual (Page 83)

5.1 Removing Jammed Documents
fi-4120C2 Image Scanner Operator’s Guide 67
TROUBLESHO
OTING
5
4. Press down on the center of the ADF to return it to its original position and lock the
ADF button.
If a document jam or Multi Feed errors occur frequenlty, follow the procedures below .
1. Align the edges of the document sheets.
ATTENTION
• Make sure that the ADF is completely closed. When it is not com-
pletely closed, document jams or feeding errors may occur.
• When the scanning is completed or canceled, the documents might
remain inside the ADF even though any error message is not dis-
played.
Follow the procedure below to remove the documetns remaining in
the ADF.
1. Remove all documents from the ADF paper chute.
2. Open the ADF by pushing down the ADF button.
3. Remove the remaining documents.
4. Push in the center of the ADF to close it until the ADF button is
locked.
Press center of
ADF