Fujitsu Siemens Computers 19T2 - Manual (Page 25)

Color monitor 19T2
A26361-K616-Z100-2-5E19 English - 17
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the PC. If your PC is equipped with a VESA-DDC-compatible VGA
interface, it can automatically read the data for ensuring optimum operation from your monitor and
select the appropriate settings.
i
If the monitor 19T2 is not yet displayed in the list of monitors, you can select one of the
following monitors instead:
Siemens or Siemens Nixdorf MCM 21T1, MCM 2106, MCM 212V
Preset operating modes
i
The display position and size have been set to optimum values at the factory for the
operating modes listed above. Depending on the screen controller used, it may be
necessary to adjust the display position and size. In this case, you can change and save
the settings (see "
Operation of the monitor ").
Horizontal frequency Refresh rate Screen resolution
31.5 kHz
±
0.5 %
31.5 kHz
±
0.5 %
53.7 kHz
±
0.5 %
63.9 kHz
±
0.5 %
68.7 kHz
±
0.5 %
80.8 kHz
±
0.5 %
93.1 kHz
±
0.5 %
91.1 kHz
±
0.5 %
107.0 kHz
±
0.5 %
106.3 kHz
±
0.5 %
70 Hz
±
0.5 %
60 Hz
±
0.5 %
85 Hz
±
0.5 %
100 Hz
±
0.5 %
85 Hz
±
0.5 %
100 Hz
±
0.5 %
100 Hz
±
0.5 %
85 Hz
±
0.5 %
100 Hz
±
0.5 %
85 Hz
±
0.5 %
720 x 400
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1600 x 1200
For ergonomic reasons we recommend a refresh rate of at least 75 Hz and a maximum resolution of
1024 x 1280 pixels.