Activating the factory settings – Fujitsu Siemens Computers 19T2 User Manual
Page 22

Color monitor 19T2
14 - English
A26361-K616-Z100-2-5E19
Restore original monitor colors (
COLOR RETURN
)
After a number of years of operation the color brightness of your monitor may
decrease slowly. With this function you can reset the monitor colors to
manufacturer's default values. (Due to the natural aging process this function may
no longer work after a certain period of time.)
Prior to being able to use this function, the monitor must have been in standard
operation for at least 30 minutes (power indicator is green). If the monitor changes
over into energy saving mode, switch it back to normal mode and wait for 30
minutes. You may have to change the energy saving settings of your computer in
order to keep the monitor in standard operating setting for 30 minutes. If the
monitor is not ready, a respective message will appear.
Press the button
. While the original screen colors are being restored the
screen remains dark. This process takes about 2 seconds.
Open Help menu (HELP)
The most frequent questions and problems are covered here.
?
Calling the
HELP
window
RETURN TO MAIN MENU
Return to main menu
RECOMMENDED RESOLUTION
Recommended resolution:
1280 x 1024 at 85 Hz
FLICKER
Flickering:
Display of current refresh rate and reference to recommended
refresh rate >75 Hz
THIN HORIZONTAL LINE
Thin horizontal line:
There is no malfunction.
DISTORTED SHAPE
Picture distorted:
Setting the picture geometry (
GEOMETRY
)
OUT OF FOCUS
Picture is blurred:
Setting convergence (
CONVERGENCE
)
DISCOLORATION
Discoloration:
Check data cable
degauss monitor (
MANUAL DEGAUSS
)
Activating the factory settings
With the factory settings button on the front of the monitor, either the adjustment of a selected
function can be specifically reset to the factory setting, all settings for the current input signal can be
reset or all input signals reset.
Resetting a selected function to the factory setting
Ê
Select the function in the OSD menu to be reset.
Ê
Press the factory settings button
.