Fujitsu Siemens Computers 19T2 - Manual (Page 21)

Color monitor 19T2
A26361-K616-Z100-2-5E19 English - 13
Setting language for the OSD menu (LANGUAGE)
A
Setting language for the OSD menu
You can choose from English (default setting), German, French, Spanish, Italian,
Swedish, Dutch, Russian and Japanese.
Setting monitor options (OPTION)
You can degauss the monitor in the settings window OPTION , you can set the Moiré correction,
change the OSD position, lock/release the buttons for monitor settings and restore original monitor
colors.
The set value for the Moiré correction is only saved for the current input signal. The other values are
independent of a change in the input signal.
Calling the OPTION setting window
Degaussing the monitor ( MANUAL DEGAUSS )
The monitor is degaussed every time you switch it on. When color shifts occur in
the screen display due to the influence of magnetic fields, the screen must be
degaussed manually.
Press the button . The monitor is degaussed for approximately 3 seconds.
If the monitor is to be degaussed a second time, please wait approximately 20
minutes before executing the function again.
Correcting the Moiré effect ( MOIRE ADJUST )
If the picture you see on screen has light and dark stripes or appears dull and
blurred, this may be due to what is known as the moiré effect. This effect usually
has physical causes, being triggered by interference between the pixels in the
matrix and the video signal. The intensity of the moiré effect is dependent on the
screen resolution and horizontal frequency.
Setting horizontal position of the OSD menu ( OSD H POSITION )
You can change the OSD position, for example, when you want to adjust the
picture behind an OSD window.
Setting vertical position of the OSD menu ( OSD V POSITION )
You can change the OSD position, for example, when you want to adjust the
picture behind an OSD window.
Lock/unlock buttons for adjusting the monitor ( CONTROL LOCK )
With this option all buttons on the front of the monitor (with the exception of the
menu button
and the on/off switch) can be locked and unlocked again.
OFF = unlocked
ON = locked
If ON has been selected, only the symbols OPTION or EXIT can be selected in the
main menu. If - with the OSD menu hidden - a button other than the menu button
or the on/off switch is pressed, the key symbol appears on the screen.