Follett 400 Series - Manual (Page 5)

20.75" (527mm)
22.75" (578mm)
13.00"
(331mm)
4.875"
(124mm)
2.375"
(61mm)
1.875" (48mm)
7.00" (178mm)
A
A
B
B
F F
D
E
C
A
B
C
C
17.00"
(432mm)
Front view — air-cooled
Satellite-fill
Side view — air-cooled and water-cooled
top mount and Satellite-fill
Satellite-fill air-cooled units only
Back view — air-cooled
top mount
Front view — water-cooled
Satellite-fill
Back view — water-cooled
top mount
12.875"
(327mm)
4.75"
(121mm)
8.375"
(213mm)
2.25"
(57mm)
1.875" (48mm)
Front view — air-cooled
top mount
Icemaker plug
configuration
NEMA 5-20
6.875"
(175mm)
2"
(51mm)
5
Dimensions and clearances
Required clearances – MCD400 series
Entire front of icemaker clear of obstruction/connections to allow removal.
12" (305mm) above icemaker for service
6" (153mm) minimum between louvered (exhaust) side of icemaker and any adjacent equipment.
MCD400AHS – 18" (457mm) minimum, 10 ft (3m) maximum between discharge and air intake grilles.
A – 3/4" MPT drain
B – 3/8" OD push-in water inlet C – Electrical cord
D – 3/8" FPT condenser inlet
E – 3/8" FPT condenser drain