Follett 400 Series User Manual
Page 10
Fig. 8
10
13. Remove icemaker top panel and
louvered side panel.
14. Insert ice transport tube to a 1/2"
(13mm) depth through mounting
bracket (Fig 8 and 9.1) and secure
transport tube away from condenser
fan under float reservoir bracket
(Fig. 9.2).
15. Tighten clamp screw(s) on icemaker
base securely (Fig. 9.3).
16. Uncoil capillary tube from bin
thermostat and route through hole in
gasket to mounting bracket and secure
as shown (Fig. 8).
17. Reinstall icemaker louvered side panel
and top panel.
GO TO STARTUP – STEP 27.
ice transport tube
bin thermostat
capillary tube
1/2"
2"
Fig. 9
2
1
3
tighten
clamp
screw
insert ice
transport
tube