Follett 400 Series - Manual (Page 15)

17. Rinse ice compression nozzles (Fig. 17.1) with water
and reinstall.
18. Drain any remaining sanitizing solution from reservoir through
float/evaporator drain line (Fig. 16.1).
19. Fill reservoir (Fig. 16.2) with 120˚F (49˚C) water. Empty water
through float/evaporator drain line (Fig. 161). Repeat 3 times.
20. Turn on water to icemaker.
21. Turn compressor switch on.
22. Replace reservoir cover and any panels removed to
clean icemaker.
23. Make ice for 30 minutes. Dispense and discard all ice.
15