Follett 400 Series User Manual
Page 12
21. Route the bin signal cord from the 4" x 4" (102mm x 102mm)
junction box through the top knockout (Fig. 13.1) and
countertop hole. Attach the bin signal connector to the two
lead plug on the icemaker.
22. Route the ice transport tube(s) from the icemaker(s) through
counter cutout and knock out into dispenser top by following
the same routing as the bin signal cord (Fig. 13.2).
19. Remove lid from dispenser top (Fig. 13.). Remove the
knockout from the Harmony top (Fig. 13.2) corresponding to
selected chase location. Line the edges of the opening with
the supplied gasket material (Fig. 13.2).
20. Follow the “Satellite-fill icemaker installation procedure”
found in the Symphony MCD400 Icemaker Manual 208600
to install your Follett icemaker.
12
1
1
2
2
2
1
Fig. 13