beautypg.com

Specifications (finepix e510) – FujiFilm E510 User Manual

Page 55

background image

109

108

Power Supply and Others

Power supply

Use one of the following:
i 2

×AA-size alkaline batteries

i Rechargeable Battery NH-10 (sold separately)
i 2

×AA-size Ni-MH (Nickel-Metal Hydride) batteries (sold separately)

i AC-3VW (PictureCradle CP-FXA10, sold separately)
i AC Power Adapter AC-3V (sold separately)

Guide to the number of
available frames for battery
operation

Conditions for use

Temperature: 0°C to +40°C (+32°F to +104°F); 80% humidity or less (no
condensation)

Camera dimensions (W/H/D) 101 mm

× 60.5 mm × 32.6 mm/4.0 in. × 2.4 in. × 1.3 in.

(not including accessories and attachments)

Camera mass (weight) Approx. 17

6 g/6.2 oz.

(not including accessories, batteries and xD-Picture Card)

Weight for photography

Approx. 225 g/7.9 oz. (including batteries and xD-Picture Card)

Accessories

See P.7

Optional accessories

See P.94

According to the CIPA (Camera & Imaging Products Association) standard procedure for
measuring digital still camera battery consumption (extract):
When using alkaline batteries, use the batteries supplied with the camera. When using Ni-MH
batteries, use Ni-MH batteries or NH-10 Rechargeable Battery. The storage media should be
xD-Picture Card.
Pictures should be taken at a temperature of 23°C, with the LCD monitor turned on, the optical
zoom moved from full wide-angle to full telephoto (or vice-versa) and back again to its original
position every 30 seconds, the flash used at full power every second shot and the camera
turned off and then on again once every 10 shots.
h Note: Because the number of available shots varies depending on the capacity of alkaline

batteries or the level of charge in Ni-MH batteries, the figures shown here for the
number of available shots using batteries are not guaranteed.
The number of available shots will also decline at low temperatures.

Alkaline batteries

Approx. 100 frames

Rechargeable Battery NH-10

Approx. 220 frames

Ni-MH batteries 2300 mAh

Approx. 290 frames

Battery Type

With LCD monitor ON

Standard number of available frames/recording time per xD-Picture Card

The number of available frames, recording time or file size varies slightly depending on the subjects photographed. Note also
that the difference between standard number of frames and the actual number of frames is greater for xD-Picture Cards
with higher capacities.

160 120

Movie

#

Approx. 288 sec.

Approx. 9.7 min.

Approx. 19.4 min.

Approx. 39.0 min.

Approx. 78.1 min.

Approx. 156.3 min.

Quality Setting

DPC-16 16 MB

DPC-32 32 MB

DPC-64 64 MB

DPC-128 128 MB

DPC-256 256 MB

Image Data Size

Number of recorded pixels

÷ F

2592

1944

2048

1536 1600

1200

640

480

320 240

÷ N

3

2

`

Movie

$

6

12

25

51

102

2.5 MB

DPC-512 512 MB

205

12

25

50

102

204

1.2 MB

409

19

40

81

162

325

780 KB

651

25

50

101

204

409

620 KB

818

122

247

497

997

1997

130 KB

3993

Approx. 94 sec.

Approx. 189 sec.

Approx. 6.3 min.

Approx. 12.7 min.

Approx. 25.5 min.

Approx. 51.0 min.

System

Model

Digital camera FinePix E510

Effective pixels

5.2 million pixels

CCD sensor

1/2.5 inch square pixel CCD
Number of total pixels: 5.36 million pixels

Number of recorded pixels

Still image: 2592

× 1944 pixels/2048 × 1536 pixels/1600 × 1200 pixels/

640

× 480 pixels (

÷

/

3

/

2

/

`

)

Movie: 320

× 240 pixels (10 frames per second with monaural sound)

160

× 120 pixels (10 frames per second with monaural sound)

Storage media

xD-Picture Card (16/32/64/128/256/512 MB)

File format

Still image: JPEG (Exif ver. 2.2)

✽ Design rule for Camera File System compliant DPOF-compatible

Movie: AVI format, Motion JPEG

Lens

Fujinon 3.2

× optical zoom lens, F2.9-F5.5

Aperture

F2.9 to F8/F5.5 to F8 (automatically selected)

Focal length

f=4.7 mm to 15.1 mm
(Equivalent to 28 mm to 91 mm on a 35 mm camera)

Focal range

Normal: approx. 60 cm (2.0 ft.) to infinity
Macro: approx. 6.7 cm (2.6 in.) to 80 cm (2.6 ft.)
Super Macro: approx. 2.6 cm (1.0 in.) to 15 cm (5.9 in.)

Shutter speed

2 sec. to 1/2000 sec. (depend on Exposure mode)

Focus

TTL contrast-type, Auto focus, Manual focus

Sensitivity

B

: AUTO (Equivalent to ISO 80 to 320, depending on conditions)/

80/100/200/400

m

/

,

/

.

/

/

/

N

/

M

/

<

/

>

: Equivalent to ISO 80/100/200/400

Photometry

TTL 64-zones metering Multi, Spot

Exposure control

Program AE (

B

,

N

,

m

,

,

,

.

,

/

), Shutter-priority AE, Aperture-

priority AE, Manual exposure

Exposure compensation

–2 EV to +2 EV in 1/3 EV-step increments (in Manual mode)

White balance

Auto (

B

,

m

,

,

,

.

,

/

)

Manual modes, 7 positions can be selected (

N

,

M

,

<

,

>

)

Viewfinder

Real image optical Approx. 80% coverage

LCD monitor

2.0 inches, Aspect ratio: 4:3; 154,000 pixels low temperature polysilicon
TFT, Approx. 96% coverage

Flash type

Auto flash using flash control sensor
Effective range: Wide-angle: Approx. 0.6 m-4.1 m (2.0 ft.-13.5 ft.)

(Approx. 0.3 m-0.8 m (1.0 ft.-2.6 ft.): Macro)

Telephoto: approx. 0.6 m-2.0 m (2.0 ft.-6.6 ft.)
Flash modes: Auto, Red-Eye Reduction, Forced Flash, Suppressed Flash,

Slow Synchro, Red-Eye Reduction + Slow Synchro

Self-timer

10 sec.

Input/Output Terminals

A/V OUT (Audio/Visual output) socket 2.5 mm dia. jack

¬ ˚

(USB) socket

For file transfer to a computer and connection to the optional cradle

DC input

Socket for specified AC power adapter AC-3V (sold separately)
Connection for the AC Power Adapter AC-3VW bundled with the cradle
(sold separately)

Specifications (FinePix E510)

✽ These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages resulting

from errors in this Owner’s Manual.

✽ The LCD monitor on your digital camera is manufactured using advanced high-precision technology. Even so, small

bright points and anomalous colors (particularly around text) may appear on the monitor. These are normal display
characteristics and do not indicate a fault with the monitor. This phenomenon will not appear on the recorded image.

✽ The operation error may be caused in a digital camera by the strong radio interference (i. e. electric fields, static

electricity, line noise, etc.).

✽ Due to the nature of the lens, the edges of images may appear distorted. This is normal.