FujiFilm E510 - Manual (Page 36)

70 71
Settings
4
When this function is enabled and the camera is
not used for 60 seconds, the screen temporarily
turns off (sleep mode) and the viewfinder lamp
blinks at 1-second intervals to save power. If the
camera remains unused for 2 or 5 minutes, it is
turned off. Use this function when you want to get
the maximum possible running time from your
batteries.
● ! The Power save setting is disabled during automatic
playback and when a USB connection is being used.
POWER SAVE SETTING
◆
To restore power to the camera
◆
When the Power save function (2 or 5 minutes
setting) has shut the camera down:
Press the “POWER” button.
FORMAT
Initialize (format) the xD-Picture Card for use with
the camera.
Because initializing the xD-Picture Card erases all
the frames (files), including protected frames (files).
Back up important frames (files) onto your PC or
another media.
1 Press “d” or “c” to select “OK”.
2 Pressing the “MENU/OK” button erases all the
frames (files) and initializes the xD-Picture
Card.
● ! If “ 7 ”, “ w ”, “ 0 ” or
“ - ” appears, see P.102 for information
before formatting the xD-Picture Card.
0 1 0 2
When the camera is in sleep mode, pressing the
shutter button down halfway wakes the camera up.
● ! Pressing any other button as well as the shutter button wakes
the camera up.
The Sleep function does not operate in SET-UP or Playback mode, but the camera will turn off if it
is left unused for a set time (2 or 5 minutes).
Bebeep
SET-UP
■ SET-UP menu options
IMAGE DISP.
1
2
3
4
ON/OFF ON
Specifies whether the preview images (the photographed
images) are displayed after taking a picture.
The image appears for a few moments and is then recorded.
–
71
71
–
–
–
13
72
73
–
14
–
–
POWER SAVE 2 MIN/5MIN 2 MIN
Reduces the camera’s power consumption and sets the
time when camera turns off.
FORMAT OK – Erases all files.
q LCD ON/OFF ON
Specifies whether the LCD monitor is ON or OFF when the
camera is turned on in Photography mode.
§ BEEP OFF/1/2/3 2
Sets the volume of the tone emitted when the camera
controls are used.
§ SHUTTER OFF/1/2/3 2 Sets the volume of the sound emitted when the shutter operates.
DATE/TIME SET – Corrects the date or time.
TIME
DIFFERENCE
SET – Specifies the time difference settings.
FRAME NO. CONT./RENEW CONT.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin again.
START-IMAGE ON/OFF OFF
Specifies whether the startup screen appears on the LCD
monitor when the camera is turned on.
ENGLISH Specifies the language used for LCD monitor display.
VIDEO SYSTEM NTSC/PAL – Specifies whether video output is set to NTSC or PAL.
q RESET OK –
Resets all the camera settings (other than the DATE/TIME,
TIME DIFFERENCE, LANG. and VIDEO SYSTEM) to the
factory default values set at shipment. A confirmation
message appears when you press “c”. To reset the camera
settings, press the “MENU/OK” button again.
Settings Display Factory default Explanation page
100 DISCHARGE OK – Discharges rechargeable batteries.
87
USB MODE ¶/q WEB/® ¶
¶ : DSC (Mass storage device) mode
This mode provides a simple way to read images from an
xD-Picture Card and store images onto an xD-Picture
Card.
86
83
q WEB: WEB CAM (WEB Camera) mode
This function allows you to conduct videoconferencing
sessions between PCs connected to the Internet.
✽ Windows XP SP1 only
® : PictBridge
If a printer that supports PictBridge is available, images can
be printed by connecting the camera directly to the
PictBridge-compatible printer without using a computer.